Product Description
3-Part, 100% Solids, Trowellable Epoxy Floor Patch System Consisting
of:
Part A – Resin
Part B – Hardener
Part C – Blended
Granite & Tint
- Self-Priming, Resin-Rich
- No Sealer, Topcoat Needed
- U.S.D.A. Approved
- Low Odor/Solvent Free
- V.O.C. Compliant
- Blended Mix for Coves
- Dense Compact Finish
- Hygienic, Easy to Clean Surface
- Resin Rich Surface Helps to
Resist Bacterial Growth
Special Features
- Meets ASTM C-884
- Thermal Compatibility with Concrete
- Excellent Adhesion to Clean, Sound,
Damp Concrete
- Excellent Adhesion to 24 Hour Old
Concrete by Priming with
- Resistant to Many Acids, Solvents and
Cleaning Solutions. (Refer to Chemical
Resistance Chart)
- Built in Resiliency for Thermal Shock
(Steam Cleaning) and Impact
Resistance
- Can be Used Indoors or Outdoors
- User Friendly Mix Ratios
- Power Trowellable
- Water Wipeable
Application
- Monolithic Floor for Heavy Traffic
- Repairing of Highly Eroded Concrete
Floors
- Where Good Chemical Resistance is
Required
- Excellent Abrasion Resistance
- Textured Finish
- Excellent for C.I.P. Areas
Packaging
Granite Patch is available as a one gallon pre-measured pack which covers
6.25 SF @ ¼".
Coverage will vary depending on surface
texture. |
Priming
Granite Patch is resin-rich and does not need a
primer on sound concrete. For deteriorated concrete, priming will help
reduce outgassing, blistering, and dry spots.
Set Times
Granite Patch is available in various setting times. For
quick reference, the following guide is given for the different temperature
applications:
Granite Patch FS (Fast Set)
- For fast set times at
ambient or higher temperatures.
Granite Patch XFS (Extra Fast Set) - For extremely
fast set times at ambient or higher temperatures.
Granite Patch XXFS (Extra Extra Fast Set) - For
extremely fast set times.
Applications below 35° F please consult the factory.
Colors
Neutral, Black, White, Gray, Dark
Gray, Brick Red, Beige, Green and Brown. Special
colors are available upon request, for an additional charge.
Clean Up
Granite Patch while still wet can be cleaned up with warm
soapy water, but if allowed to set then mechanical cleaning or the
application of a very strong paint stripper will have to be used.
Precautions
As with all epoxies, good hygienic habits must be
observed and the wearing of protective clothing and gloves is advised.
Before using any of the products, please read their respective safety data
sheets.
|
